Szczecin
Wojska Polskiego 11, 70-470
+48 793 416 519
24/7 Customer Support
Mon - Fri: 9:00 - 17:30
Online store always open
Wojska Polskiego 11, 70-470
24/7 Customer Support
Online store always open
With high-precision algorithms and sensors, the SolarWalker S1 robot can autonomously and intelligently determine its cleaning patterns.
Thanks to the sensors that can help SolarWalker S1 prevent itself from dropping off the panels when doing the job on the panel surface.
When SolarWalker S1 cleans in dry condition, it can be fully automatically operated. When SolarWalker S1 cleans in wet conditions needs to hold the water pipe.
SolarWalker S1 works in low-light conditions or even in night time. It is suitable for applications in those areas with extremely high temperatures during day time.
The Mamibot SolarWalker S1 is the pioneering fully automatic robot cleaner designed specifically for solar panel maintenance. It effectively cleans panels with installation angles of up to 15 degrees in wet conditions and 20 degrees in dry conditions. With a single full charge, the SolarWalker S1 can operate continuously for up to 4 hours, making it capable of completing wet cleaning for 1.7MW within a single day (8 hours). This innovative cleaning solution is ideal for solar parks, solar farms, rooftop installations, and ground-mounted photovoltaic systems.
The SolarWalker S1 is equipped with a sophisticated array of sensors that enable it to operate effectively even in low-light conditions, allowing it to work seamlessly during night time.
The SolarWalker S1's battery can provide up to 4 hours of continuous operation on a single charge. It can effectively clean solar panels throughout an entire day with two batteries, allowing it to cover an impressive area of 1.5-2MW of solar panel cleaning in a day.
With the support of high-precision algorithms and sensors, the SolarWalker S1 robot is able to autonomously and intelligently determine its cleaning patterns. This advanced technology enables the robot to efficiently and effectively clean solar panels without the need for manual intervention.
When SolarWalker S1 cleans in dry condition, it can be fully automatically operated. Just put the robot in the right lower corner, and press it to go. It returns to the starting point after one full array of solar panels is cleaned.
When SolarWalker S1 cleans in wet condition, hold the water pipe and press the robot to start it.
It will follow a smart cleaning pattern that is supported by groups of high-precise sensors and intelligent algorithms.
SolarWalker S1 works under harsh environment with temperature among -20°C to + 60°C, module surface tempearture up to 85°C
Thanks to the sensors that can help SolarWalker S1 prevent itself from dropping off the panels when doing the job on the panel surface.
Driven by high-speed rotating brushes, the machine can effectively remove floating dust, accumulated ash, bird droppings, and other debris. When paired with chemical cleaning agents, it can more efficiently clean stubborn or oily stains such as tree sap.
We are constantly working on optimizing the algorithms of SolarWalker S1 and will release updates as needed. This machine can be controlled through an APP. If your robot is the version with APP, you can operate up to 20 robots online simultaneously through the APP.
SolarWalker S1 makes the cleaning patterns full autonomously, and returns to the starting point after one full circle of cleaning.
SolarWalker S1 works in low-light conditions or even at nighttime. It is suitable for applications in those areas with extremely high temperatures during the daytime. Please pay attention to the surroundings (including obstacles, gaps, people, or animals on site when using it at night).
1 person+1 SolarWalker S1 + 8 hours >=1.6MW Cleaning ***
Reference On-site test data: Modules: 1400 pcs Mysolar 720W HJT modules, ground-mounted One array=70pcs, total 20 arrays, module size: 2384*1303mm
Total volume: 720*20*70=1008000Watt (1.008MW)
Full Automatic dry cleaning: 5 hours 10 minutes Average cleaning efficiency: 195KW/hour
Semi-automatic dry cleaning: 4 hours 50 minutes Average cleaning efficiency: 215KW/hour
Gap between two modules:<= 400mm, Hight between two modules: <=200mm
VSLAM Navi Technology
Breakpoint Cleaning
Dimension (No Brush): 676*585*275mm
Net Weight: 24.45KG
SolarWalker S1 works in low-light conditions or even at nighttime. It is suitable for applications in those areas with extremely high temperatures during day time. Please pay attention to the surroundings (including obstacles, gaps, people, or animals on site when using it at night).
ensures that the SolarWalker S1 can work on rainy days ***Rainy day working condition: Rainfall<=50mm, wind speed<=38km/h. Do not put your robot or use it in a thunderstorm
We will support you and help you achieve your solars goals. From project to installation, we can help you every step of the way. Join our family and own your solar investment. What are you waiting for? Take the first step today.
© 2021 All Rights Reserved. Privacy Policy Sitemap